Most weeks someone sends me a photo of a glass shade. A schoolhouse shade, a milk glass globe, sometimes one with painted bands. It came from a flea market or an estate sale, or out of a box in a relative's garage. The question is almost always the same: what do I hang this on?
For shades with a 6-inch fitter, I now have a straight answer. We're stocking a new 6-inch fitter semi-flush ceiling fixture, made to hold the glass people already own.
What a fitter is
The fitter is the opening at the top of a glass shade: a short neck with a raised lip around it. That lip sits inside the shade holder on the fixture, and screws in the holder press against it to keep the glass in place.
Fitter sizes are a shared standard: a 6-inch shade fits a 6-inch holder, whoever made each one. Common sizes include 2 1/4, 3 1/4, 4, 6, 8, and 10 inches. The number is nominal, so a 6-inch shade won't always measure exactly six inches.
Where these shades came from
Electric ceiling light spread through American houses, schools, and stores in the early 1900s, and glass and fixture makers worked to shared fitter sizes. That's why a hundred-year-old shade can still go up on a ceiling today.
The schoolhouse shade is the one most people picture: white opal or milk glass, shaped as a cylinder, a bell, or a rounded globe. It hung in classrooms, kitchens, and hallways through the first half of the 20th century, and many of the larger ones were made to the 6-inch fitter.
The fixtures didn't last as well. In a remodel, the old holder usually comes down with the old wiring and gets thrown out. The glass is easier to save, so it ends up at flea markets. The result: plenty of good 6-inch shades, and few sound fixtures to hang them from.
open at the bottom,
What the fixture is
New production, not salvage:
- Shade holder: Accepts a nominal 6-inch fitter. Three thumbscrews clamp the fitter lip and hold the glass in place.
- Size: 6 1/2 inches wide at the shade holder, 5 3/4 inches tall without a shade. A stepped canopy and short neck keep the shade close to the ceiling.
- Socket: Medium base (E26), the standard U.S. household base, with a porcelain interior.
- Bulb: Type A (the ordinary pear-shaped household bulb), up to 60 watts.
- Rating: UL listed for dry locations. Steel construction. Mounts to a standard ceiling electrical box.
- Finishes: Polished Nickel, Satin Nickel, Satin Brass, Antique Brass, and Black.
Glass shade and bulb are not included. The price is $84.40 in every finish, with free domestic shipping and a 30-day return policy.
This fixture is new. Hang an original shade on it and you have an original vintage shade on a new fixture, not a restored original, and that's how it should be described. When I have restored original holders, they're in the Lighting collection.
https://vintporium.com/products/6-fitter-semi-flush-mount-ceiling-light-schoolhouse-shade-holder
Before you hang it
Check the shade's lip for chips or hairline cracks. The thumbscrews press right on it, and a cracked lip can let go overhead.
The fixture needs a properly installed ceiling box. In an older house, have an electrician look first. I don't publish wiring steps: a small mistake here becomes a fire or a shock, so it should be installed by someone who knows the local code.
Respect the 60-watt limit. An LED Type A bulb gives the same light on far fewer watts and runs cooler, which is easier on old glass.
Salvager's Note: Measure before you buy. Turn the shade upside down and measure across the outside of the lip. A 6-inch fitter will come in close to six inches. Nearer 4 or 5 1/4 means a different size. Not sure? Send me a photo and the measurement.
1-408-387-0845
joe@vintporium.com
