Antique Lighting and House Parts
Cart 0

Storm Windows: Comfort Without Replacing Old Windows

The most practical thing you can do for an old window is often to leave it alone and hang storm windows in front of it. Storm windows are unglamorous. They're also why a hundred-year-old sash can keep working through winters it was never built to handle.

Still air does the work

The logic is old and simple. An original wood window is one layer of glass in a frame that's already proven it can last a century. Its weakness isn't the glass. It's the thin, leaky air the assembly lets slip past. A storm window adds a second pane and, more to the point, a trapped layer of still air between the two. Still air is the insulator. That dead space does most of the work: it blunts drafts and slows the heat loss and the condensation that rots a sash from the inside.

Replacement gets sold as the modern answer, and for a builder-grade window it might be. For an original one, replacement throws out wavy old glass, wood milled from denser timber than you can easily buy today, and joinery designed to be repaired instead of discarded. A storm window keeps every bit of that and solves the cold problem beside it. The parts that make it work are small enough to overlook: the hangers that let an exterior storm sash mount and lift, the turn buttons that hold it, the clips and fasteners that let the whole thing come down in spring and go back up in fall. When one goes missing, a window stops being seasonal and starts being stuck.

Salvager's Note: A wooden storm window needs its small hardware to work: hangers to mount it, turn buttons or clips to hold it, and fasteners to fix them to the frame. A missing hanger or catch, not the sash itself, is usually all that stands between "worth keeping" and actually kept.

Find Your Part

Search the catalog by part, fitter size, or fixture type — try “2 1/4 shade”, “mogul socket”, or “sash lock”.

 

The Vintporium Heritage Standard

The Heritage Standard

Restored by hand, one at a time. Old wire out. New wire rated for present use, sound sockets, and grounding where the fixture allows. The body, glass, finish, and the marks it earned stay. Every fixture is tested on the bench before it leaves the shop.

Can't Find the Part?

Looking for a matching sconce, a replacement shade, or an odd-sized fitter? Send us a photo and measurements. A large portion of our inventory is uncataloged. Many of the doors, windows, fireplace surrounds, bath fixtures, and architectural pieces in the yard never make it to the website. If you don't see it online, that doesn't mean we don't have it.

About the Salvager

Joe Golda has run Vintporium from his workshop in San José since 2008. He sources the pieces, pulls the old wiring, rewires them, finishes them by hand, and packs them himself. One person, one bench, one standard. Every fixture is tested — each socket, each switch — before it ships. What's original is called original. What's new is called new. We call this commitment to candor and craft our Heritage Standard.